Brand: SPEEDBOX TUNING FOR BROSE AND SPECIALIZED MOTORS | Code: SB31_BRO_1pcs_BOX | ID: 2341
Compatibility: Motors: S-MAG, S, T, C, T-ALU, Specialized, Tuning control (Brose, Specialized) You can activate tuning in the SpeedBox Connect app, or directly on the e-bike's display by briefly activating the WALK function. The display will briefly show a value of 99 km/h, indicating that tuning is active — from this point on you can ride at 40 km/h, 50 km/h, or even more than 60 km/h. You deactivate tuning the same way — the display will show 25 km/h and the e-bike will return to its original speed limit. If you don't have a classic control unit with the WALK function, you can control tuning using the + − + − button combination. Setting a custom speed limit You can set the maximum assistance speed in the SpeedBox Connect app, or on the display by gradually switching modes: TURBO → TRAIL → ECO → OFF → ECO → TRAIL → TURBO. The current speed limit will then be displayed. Switch the limit by briefly activating the WALK function or turning the rear wheel 360°. The speed increases by 5 km/h each time. The last displayed limit is saved after 5 seconds of inactivity. Tuning control (SRAM Powertrain) You activate or deactivate tuning by briefly activating the WALK function, or by switching between two assistance modes using the + − + − buttons. Activating tuning (unlimited speed) → the display will show a battery value of 99%, which corresponds to a maximum speed of 99 km/h. Deactivating tuning (limited speed) → the display will show a battery value of 25%, which corresponds to a speed limit of 25 km/h. Setting the maximum assistance speed You set a custom maximum speed in the SRAM AXS app, in the Ride Modes section. Here you adjust the Max Power parameter for individual modes — first decrease it three times, then increase it three times. The controller will briefly display the current speed limit as a battery percentage. Then, using the WALK function, gradually set the maximum speed — each press increases the battery value by 5%, which corresponds to raising the speed limit by 5 km/h. For example, a value of 55% means a 55 km/h limit, 60% means 60 km/h, and so on. The last displayed limit is saved after 5 seconds of inactivity. For detailed instructions and any additional questions, you may contact the manufacturer! Also compatible with: SRAM Powertrain by Brose, Not compatible with: Brose Remote Control, e-bikes without a connector in the display port (usually have only a blanking plug), ABS. For detailed instructions and any additional questions, you may contact the manufacturer!
OUT OF STOCK, DELIVERY TIME 1-7 DAYS
209.00€
198.55€(- 10.45€)
VAT (included)